Billet Specialties Wheel model
Billet Specialties Comp 5
The Comp 5 is a dedicated drag racing wheel, offered in front and rear versions. The front wheels use a one-piece monobloc rotary forged construction certified to SFI 15.2, while the rear wheels are of two-piece construction (spun aluminum rim halves and forged centers) certified to SFI 15.1. The forged 6061-T6 center provides high strength at minimal weight: a 15 x 3.5 front weighs about 8.6 lb. The front versions offer spindle mount options with Timken bearings and National seals, a billet screw-on center cap, and direct mounting of the brake rotor; the rears offer a beadlock ring to secure tires at low pressure. Grade 8 hardware and controlled lateral and radial runout round out the package. Common bolt patterns are 5x4.5, 5x4.75, and 5x5. It's a purely competition wheel: not relevant for street or winter use, it targets track vehicles seeking lightness and SFI certification.
Model profile
The Comp 5 is a dedicated drag racing wheel, offered in front and rear versions. The front wheels use a one-piece monobloc rotary forged construction certified to SFI 15.2, while the rear wheels are of two-piece construction (spun aluminum rim halves and forged centers) certified to SFI 15.1. The forged 6061-T6 center provides high strength at minimal weight: a 15 x 3.5 front weighs about 8.6 lb. The front versions offer spindle mount options with Timken bearings and National seals, a billet screw-on center cap, and direct mounting of the brake rotor; the rears offer a beadlock ring to secure tires at low pressure. Grade 8 hardware and controlled lateral and radial runout round out the package. Common bolt patterns are 5x4.5, 5x4.75, and 5x5. It's a purely competition wheel: not relevant for street or winter use, it targets track vehicles seeking lightness and SFI certification.
To choose this model, confirm the width, diameter, bolt pattern, offset, center bore, load rating, TPMS compatibility and brake clearance.